DTF

Description

Direct to Film printing is the latest trend in printing. Full color graphics are printed on a transfer film, then using a heat press the print is transferred onto a final product. The process is superior to DTG printing as it can be done on polyester blends as well as cotton, and the prints aren’t as thick as Plastisol prints giving a softer feel. DTF can even be used on products that used to be limited to cut and weeded graphics like hats, tote bags, virtually any fabric product.

White ink is available on our transfers, allowing for contoured graphics. The graphics are backed with a flood white so they work on light and dark garments. The transfers are stable and can be stored for later use allowing you to print now and apply on demand!

Spec

Print

• Cold Peel Transfer Film
• 5/0 (CMYK + White ink)
• White melt adhesive

File Instructions

We only accept PNG files for this product.
Artwork should be submitted with transparent backgrounds.

• PNG Only
• File must be transparent background
• Require ⅛” safety margin along all edges to avoid print cut off in trimming
• Gang up designs on your artboard to utilize the square footage price (e.g. repeat the same design on the artboard to maximize cost)
• 5/0 color printing
• Max size 22” x 120”
• Transfers will be trimmed to ordered size
• Minimum detail size – Uploaded artwork should not contain elements smaller than 0.02 inch(0.5 mm). Fine details below this threshold may result in printing or adhesion issues during application.

Pressing Instructions

Our DTF is a cold peel film. Heat, pressure, and time should be adjusted according to individual machines and substrates. The following are general recommendations for reference only.

• Pressure: 35-50 PSI
• Pre-Press: 5-7 seconds until moisture is gone
• Press: 290-320℉ 10-20 seconds
• Post-Press: 5-7 seconds with a teflon sheet or other preferred material